Technotrend USB Devices Driver



  • The drivers for TechnoTrend DVB-T USB 2.0 BP Device for Windows 10 x64 were not found in the catalog. Download DriverPack to select the driver automatically.
  • Change BDA type detection order. Use Turbosight, DVBWorld extension for TeVii devices with old drivers (pre 2009). Show Technotrend product name instead tuner filter name. Change credits and added project url in device.
  • Download usb driver - Best answers Spvd-012.1 usb driver for windows 10 - Forum - Drivers Sony psp usb driver windows 10 - How-To - PSP.

Download usb driver - Best answers Spvd-012.1 usb driver for windows 10 - Forum - Drivers Sony psp usb driver windows 10 - How-To - PSP.

BDA Interface v0.2.1.1239

  • Added multistream & PLS support for TBS 5925, 6925 and 6983 cards (the direct hwcontrol mode in TBS.ini must be 0 (disabled))

BDA Interface v0.2.1.1142 / 0.2.0.21 For AltDVB

  • [0.2.1.1142] improved TBS 5925, 5980 support
  • [0.2.0.21] Fix Pinnacle 4xxe support (Technotrend BDA).

BDA Interface v0.2.1.1127

  • Fixed LNB power management for TBS USB cards.( It is required at least December 2011 driver for TBS 5980,5925,6925 cards. )

BDA Interface v0.2.1.1103

  • Fix DVBWorld BDA-extension support (DiSEqC 1.x)

BDA Interface v0.2.1.1095

  • Improved multistream transponder support (Some multistream transponders are included in the mis.ini)

BDA Interface v0.2.1.1068 / 0.2.0.19 For AltDVB

  • Netup BDA-extension support (DiSEqC 1.x).
  • Fix Genpix BDA-extension support (ToneBurst, DiSEqC 1.x)

BDA Interface v0.2.1.1068 / 0.2.0.18 For AltDVB

  • [0.2.1.1068] Added support for prototype of TBS6926. (updated TBS6925V2 broadband tuner with 250-2300MHz)
  • [0.2.0.18] Fix Bestunar/DVBSky BDA-extension support (DiSEqC 1.x)

BDA Interface v0.2.1.938 / 0.2.0.17 For AltDVB

Technotrend USB Devices Driver
  • Fix Compro BDA-extension support (DiSEqC 1.x).

Note from the DVB Support: v0.2.1.938 has more functions as you'll see in Tools > Device Info/Config

BDA Interface v0.2.0.16 For AltDVB

  • Genpix BDA-extension support (ToneBurst, DiSEqC 1.x).
  • Genpix 3dparty BDA-extension support (ToneBurst. DiSEqC 1.x).
  • Compro BDA-extension support (DiSEqC 1.x, LNB power control).
  • AnySee BDA-extension support (Toneburst, DiSEqC 1.x control).
  • DVBWorld support improved.

BDA Interface v0.2.0.15 For AltDVB

  • Bestunar/DVBSky BDA-extension support (DiSEqC 1.x control).
  • Improved Omicom, TeVii BDA-extension support.

BDA Interface v0.2.0.14 For AltDVB

  • TBS QBox detection fix.QBox BDA-extension preffered except Prof 7500.

BDA Interface v0.2.0.13 For AltDVB

  • New option - Relock after timeout. Useful for motorized dishes or periodical signal drops.

BDA Interface v0.2.0.12 For AltDVB

  • Fix modulation autodetect.
  • 8VSB modulation for satellite devices used as NBC_QPSK
  • [v0.2.0.11]Device configuration dialog implemented.


Now MS VC2008 SP1 runtime required (MSVCRT and MFC).

BDA Interface v0.2.0.10 For AltDVB

  • Continous 22Khz tone control, when LOF Switch=0.
    For example: LOF Low=5150, LOF Switch=0, LOF High=0 - 22Khz tone off, LOF=5150
    LOF Low=0, LOF Switch=0, LOF High=10750 - 22Khz tone on, LOF=10750
  • Turbosight 6925 V2 support (DiSEqC 1.x control).
  • Turbosight QBOXs support fixed again (DiSEqC 1.x control).

BDA Interface v0.2.0.9 For AltDVB

  • Turbosight QBOXs (and ODM like Prof 1100, MatchBox Pro) support fixed (DiSEqC 1.x, LNB power control).

BDA Interface v0.2.0.8 For AltDVB

  • Revert 0.2.0.7 changes (LNB power-on failed for some devices).
  • Omicom S2 DiSEqC 1.x minor fix (enable continous 22Khz (50ms) before DiSEqC command).
  • Turbosight QBOX, QBOX2, QBOX-S2 and Prof 1100 support (DiSEqC 1.x, LNB power control). (Need testing !)

BDA Interface v0.2.0.7 For AltDVB

  • Initial DVB-S tuning speed-up.

BDA Interface v0.2.0.6 For AltDVB

  • Initial DVB-S tuning again fixed (power-on).

BDA Interface v0.2.0.5 For AltDVB

  • Experimental Microsoft Windows7 DiSEqC BDA-extension support. Used in Windows7 Media Center (DiSEqC 1.0), if driver provide this extension.
    Most Win7-designed BDA-drivers provide this extension only for DiSEqC 1.0, but specification support RAW DiseqC 1.x/2.x and ToneBurst.
    Current build support only ToneBurst/DiSEqC 1.0 for this extension (but in sources implemented also RAW DiseqC support).
  • New configuration file option BDA_TYPE - preffered BDA-extension (Microsoft or TeVii). BDA extension always autodetected and this option can change priority.

BDA Interface v0.2.0.4 For AltDVB

  • Initial DVB-S tuning fixed (power-on, power-off).

BDA Interface v0.2.0.3 For AltDVB

Technotrend Usb Devices Drivers

  • DVB-S tuning code cleanup.

BDA Interface v0.2.0.2 For AltDVB

  • Change BDA type detection order. Use Turbosight, DVBWorld extension for TeVii devices with old drivers (pre 2009).
  • Show Technotrend product name instead tuner filter name.
  • Change credits and added project url in device selection dialog.
  • *v0.1.0.12 and later not need any MSVC runtime.

BDA Interface v0.2.0.1 For AltDVB

  • Removed DVBS2Signalling, DiSEqC, S_ROLLOFF settings from config.
  • Added FEC support.
  • LNB power-off support.
  • Vendor-specific BDA extension autodetection. Now supported:
    • Technotrend BDA API (use ttBdaDrvApi_Dll.dll). ToneBurst + Raw DiSEqC, LNB power-off, Modulation type selection.
    • Hauppauge BDA extension. Raw DiSEqC, Modulation type selection, S2 Pilot/RollOff settings.
    • Conexant BDA extension. Raw DiSEqC, Modulation type selection, S2 Pilot/RollOff settings (optional), LNB power-off (optional).
    • DvbWorld BDA extension. ToneBurst + Raw DiSEqC, Modulation type selection.
    • Turbosight BDA extension. Raw DiSEqC, Modulation type selection, LNB power-off.
    • Twinhan BDA extension. ToneBurst + Raw DiSEqC, Modulation type selection, LNB power-off.
    • TeVii BDA API (TeVii.dll). Raw DiSEqC, LNB power-off, Modulation type selection.
    • Omicom BDA extension. ToneBurst + Raw DiSEqC, Modulation type selection.

BDA Interface v0.1.0.12 For AltDVB

  • Recompiled with latest Technotrend BDA SDK (1.0.1.21). Now use ttBdaDrvApi_Dll.dll
  • Now on Google Code - http://code.google.com/p/altbda2

BDA Interface v0.1.0.11 For AltDVB

  • Technotrend budget için raw DiSEqC desteği eklenmiş..(Uyarı: DiSEqC, Technotrend BDA drivers v.4.4.10.x driverla çalışıyor..v5.0.0.x serisine DiSEqC desteği yok..
  • Hauppauge DVB-S2 tuning (ayarlama) halen beta safhasında..
  • New implementation of raw DiSEqC support for Technotrend budget
    warning: DiSEqC works only with Technotrend BDA drivers v.4.4.10.x! The v5.0.0.x series does NOT support DiSEqC
  • Hauppauge DVB-S2 tuning still in beta phase

BDA Interface v0.1.0.10 Beta1 For AltDVB

  • Hauppauge DiSEqC düzeltilmiş..
  • Hauppauge DiSEqC has been fixed.

BDA Interface v0.1.0.10 Beta For AltDVB

  • Hauppauge tescilli arayüz için destek eklenmiş..(8PSK tuning ve DiSEqC) ( DiSEqC test edilmedi..)
  • Özel TT DiSEqC test sürümü
  • Added support for Hauppauge proprietary interface (8PSK tuning and DiSEqC)
  • Hauppauge DiSEqC has not been tested (couldn't find a user to perform tests), please send me a short description of your setup along with logs and state if it works or not.
  • Private TT DiSEqC test release

BDA Interface v0.1.0.8 For AltDVB

  • Airstar-2 de final BDA 4.4.1 driver la oluşan tuning problemi düzeltilmiş..
  • Birçok sürücünün uygulamadığı 'failed put_FrequencyMultiplier' mesajı silinmiş..

What Is A Usb Devices

  • fixed tuning for Airstar-2 with final BDA 4.4.1 drivers
  • removed 'failed put_FrequencyMultiplier' message, most drivers don't implement it

BDA Interface v0.1.0.7 For AltDVB

  • Birden fazla topoloji düğümünde tuner sinyal istatisliği raporlandığında meydana gelen hatalar düzeltilmiş..
  • fixed bug when tuner reports signal statistics on more than one topology node

BDA Interface v0.1.0.6 For AltDVB

  • Kodlarda temizlik yapılmış..
  • TwinHan AD-SP400 CI için düzeltmeler yapılmış..
  • DVB-C Twinhan 2033 Mantis için düzeltmeler yapılmış..
  • Bir özel sunumdaki put_Range deki hatalar düzeltilmiş..
  • KNC One için düzeltmeler yapılmış..
  • konfigürasyon dosyası eklenmiş..
    • a) DVB-S2 kanallar ayarlanamayınca varsayılan 8VSB, 8PSK değere dönüştürülür.. - Yeni driverlar 8PSK sinyali vermek için yeni değeri kullanır..
    • b) Şimdi daima COMMITED için DiSEqC konfigürasyonu
  • code cleanup
  • fixed bug for TwinHan AD-SP400 CI
  • fixed bug for DVB-C Twinhan 2033 Mantis
  • fixed bug in put_Range introduced in an private release
  • fixed bug for KNC One
  • added configuration file
    • a) those that can't tune to DVB-S2 channels try changing the default 8VSB
      to 8PSK value - newer drivers use new value for 8PSK signalling
    • b) DiSEqC configuration for now is always COMMITED

BDA Interface v0.1.0.1 For AltDVB

  • fixed bug when there is no seperate Capture filter
  • fixed bug with hard-coded LowBandF, HighBandF, SwitchF for DVB-S tuning
  • added more error logging
  • tweaked tuning

*Twinhan Starbox USB 2.0 la şimdi Çalışıyor ! (Diseq çalışmıyor..Yani uydu direk takılması gerekir..) 1.0.3.4 Twinhan BDA driver yüklü olsun..Siteden AltDVB 2.2 yi indirip bu dosyayı AltDVB klasörü içinde devices klasörüne winrar ile açın..ve Alt-DVB yi açıp Dev_BDA2Driver seçip Type deki değere tıklayıp OK.leyin..

*Tested Twinhan Starbox USB 2.0 with 1.0.3.4 BDA driver work ok ! ( Diseq not work )

New BDA Interface For AltDVB

v 0.1.0.0

AltDVB (v2.2.0 build 3912) için yeni bir BDA Aygıtı..Özellikle v5.0.0.x BDA drivers la TT S2-3200 (Diğer adı SkyStarHD) kartda çalışması için yapılmış..SkyStarHD veya TT S2-3200 kartınız varsa en son 5X BDA driverı yükleyip deneyin..BDA driverı olan farklı bir kart sahibi isenizde denemeyi ihmal etmeyin..Belki çalışabilir..

  • For AltDVB v2.2.0 build 3912
  • it might work with other BDA compatible devices, but no guarantee is given
  • Technotrend's BDA drivers (still) have difficulties with DiSEqC 1.0 under BDA,especially when tuning to 8PSK transponders
  • DVB-S support have been tested only with the TT S2-3200 card (aka SkystarHD)
  • DVB-T support has been tested only with the TwinHan MagicBox Pro VP-704A (aka Pinnacle PCTV-310e)
  • don't have access to DVB-C hardware, so it's not tested at all
  • CI & IR remote will probably not ever be supported

The USB boards are identified by an identification called USB ID.

The lsusb command allows identifying the USB IDs:

Newer camera devices use a standard way to expose themselves as such,via USB Video Class. Those cameras are automatically supported by theuvc-driver.

Older cameras and TV USB devices uses USB Vendor Classes: each vendordefines its own way to access the device. This section containscard lists for such vendor-class devices.

While this is not as common as on PCI, sometimes the same USB ID is usedby different products. So, several media drivers allow passing a card=parameter, in order to setup a card number that would match the correctsettings for an specific product type.

The current supported USB cards (not including staging drivers) arelisted below[1].

DriverUsb

Technotrend USB Devices Driver

[1]some of the drivers have sub-drivers, not shown at this table.In particular, gspca driver has lots of sub-drivers,for cameras not supported by the USB Video Class (UVC) driver,as shown at gspca card list.

Technotrend Usb Devices Driver Updater

DriverName
airspyAirSpy
au0828Auvitek AU0828
b2c2-flexcop-usbTechnisat/B2C2 Air/Sky/Cable2PC USB
cpia2CPiA2 Video For Linux
cx231xxConexant cx231xx USB video capture
dvb-as102Abilis AS102 DVB receiver
dvb-ttusb-budgetTechnotrend/Hauppauge Nova - USB devices
dvb-usb-a800AVerMedia AverTV DVB-T USB 2.0 (A800)
dvb-usb-af9005Afatech AF9005 DVB-T USB1.1
dvb-usb-af9015Afatech AF9015 DVB-T USB2.0
dvb-usb-af9035Afatech AF9035 DVB-T USB2.0
dvb-usb-anyseeAnysee DVB-T/C USB2.0
dvb-usb-au6610Alcor Micro AU6610 USB2.0
dvb-usb-az6007AzureWave 6007 and clones DVB-T/C USB2.0
dvb-usb-az6027Azurewave DVB-S/S2 USB2.0 AZ6027
dvb-usb-ce6230Intel CE6230 DVB-T USB2.0
dvb-usb-cinergyT2Terratec CinergyT2/qanu USB 2.0 DVB-T
dvb-usb-cxusbConexant USB2.0 hybrid
dvb-usb-dib0700DiBcom DiB0700
dvb-usb-dibusb-commonDiBcom DiB3000M-B
dvb-usb-dibusb-mcDiBcom DiB3000M-C/P
dvb-usb-digitvNebula Electronics uDigiTV DVB-T USB2.0
dvb-usb-dtt200uWideView WT-200U and WT-220U (pen) DVB-T
dvb-usb-dtv5100AME DTV-5100 USB2.0 DVB-T
dvb-usb-dvbskyDVBSky USB
dvb-usb-dw2102DvbWorld & TeVii DVB-S/S2 USB2.0
dvb-usb-ec168E3C EC168 DVB-T USB2.0
dvb-usb-gl861Genesys Logic GL861 USB2.0
dvb-usb-gp8pskGENPIX 8PSK->USB module
dvb-usb-lmedm04LME DM04/QQBOX DVB-S USB2.0
dvb-usb-m920xUli m920x DVB-T USB2.0
dvb-usb-nova-t-usb2Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0
dvb-usb-operaOpera1 DVB-S USB2.0 receiver
dvb-usb-pctv452ePinnacle PCTV HDTV Pro USB device/TT Connect S2-3600
dvb-usb-rtl28xxuRealtek RTL28xxU DVB USB
dvb-usb-technisat-usb2Technisat DVB-S/S2 USB2.0
dvb-usb-ttusb2Pinnacle 400e DVB-S USB2.0
dvb-usb-umt-010HanfTek UMT-010 DVB-T USB2.0
dvb_usb_v2Support for various USB DVB devices v2
dvb-usb-vp702xTwinhanDTV StarBox and clones DVB-S USB2.0
dvb-usb-vp7045TwinhanDTV Alpha/MagicBoxII, DNTV tinyUSB2, Beetle USB2.0
em28xxEmpia EM28xx USB devices
go7007WIS GO7007 MPEG encoder
gspcaDrivers for several USB Cameras
hackrfHackRF
hdpvrHauppauge HD PVR
msi2500Mirics MSi2500
mxl111sf-tunerMxL111SF DTV USB2.0
pvrusb2Hauppauge WinTV-PVR USB2
pwcUSB Philips Cameras
s2250Sensoray 2250/2251
s2255drvUSB Sensoray 2255 video capture device
smsusbSiano SMS1xxx based MDTV receiver
stkwebcamUSB Syntek DC1125 Camera
tm6000-alsaTV Master TM5600/6000/6010 audio
tm6000-dvbDVB Support for tm6000 based TV cards
tm6000TV Master TM5600/6000/6010 driver
ttusb_decTechnotrend/Hauppauge USB DEC devices
usbtvUSBTV007 video capture
uvcvideoUSB Video Class (UVC)
zd1301ZyDAS ZD1301
zr364xxUSB ZR364XX Camera